TR-60xxf Series
All-in-One Advanced AP/PtP/CPE Model
Tranzeo is pleased to announce our all new TR-60xxf Series 2.4 GHz radio. These integrated fully functioning radios can be configured as an Access Point, a Point to Point bridge, or a Client Adapter (CPE).
All New Overall Features: Dual Ethernet Ports
This allows you to daisy-chain radios at your installation sites (depending on power requirements). Great for installing peripheral Power over Ethernet devices like weather monitoring or security cameras.
More Robust Routing Features Tunneling Protocol Support
Includes support for tunneling protocols such as VPN, PPTP, RSA, etc.
Low Power Requirements
Excellent for solar and other alternative power source installations. TR-60xxf Series requires only 5.5 Watts.
All New Access Point Features: Wireless Distribution System (WDS)
WDS allows Access Points to be wirelessly connected to each other while also servicing clients.
Wi-Fi Protected Access (WPA)
WPA improves on the security features of WEP. It includes improved data encryption and user authentication.
WPA and WEP LEDs
Outside LEDs allow you to easily see if WEP or WPA is activated on your Access Point.
All New Client Adapter (CPE) Features: Alignment LEDs
Now you can align your client and point to point installations without having to log into the radio. Get visual signal strength at a glance by using this great new feature.
Controllable High Gain Output
All radios have 23dBm maximum output. Great for long distance client applications. Power can be scaled back for closer installations to avoid noise issues and to meet local regulatory requirements.
Not all channels approved for use in all areas.
Specifications TR-6000f / TR-6015f / TR-6019f
| Features | |||||
|---|---|---|---|---|---|
| Standard | 802.11b | ||||
| Frequency Range | 2401 MHz to 2483.5 MHz | ||||
| Radio Mode | Access Point / Point to Point / Customer Premise Equipment | ||||
| Data Range & Modulation | 11 Mbps & 5.5 Mbps CCK, 2 Mbps DQPSK, 1 Mbps DBPSK | ||||
| Communication Method | Half-Duplex | ||||
| Transmit Power | +23dBm max | ||||
| Receiver Sensitivity | -85dBm @ 11Mbps, -90dBm @ 1Mbps | ||||
| Polarization | Horizontal or Vertical | ||||
| Antennas | |||||
| Model | Type | Wind Load (N) | Beamwidth | ||
| 100 mph | 125 mph | Horizontal | Vertical | ||
| TR-6000f | N-Connector | 100 | 160 | N/A | N/A |
| TR-6015f | 15dB Panel (internal) | 100 | 160 | 20° | 33° |
| TR-6019f | 19dB Panel (internal) | 170 | 270 | 15° | 16° |
| Management | |||||
| Remote Configuration | Based on IP Address | ||||
| Device Management | Windows Utility, Web-Based Management | ||||
| Protocol Supported | TCP/IP | ||||
| Security | 40 bits and 128 bits WEP encryption, Media Access Control address filter (MAC), WPA | ||||
| Ethernet Connector | 10/100 base T (Water Tight RJ-45) | ||||
| Operating Temperature | -65°C to +70°C | ||||
| Warranty | 1 Year Depot | ||||
| Dimensions | |||||
| TR-6000f / TR-6015f | 13″ X 10″ (radio only) | ||||
| TR-6019f | 16″ X 14″ (radio only) | ||||
| Power Supply | |||||
| Standard | AC Wall Plug Input: 120V 60Hz Output: 18V, 1000mA | ||||
| Optional | AC Wall Plug Input: 120V 60Hz Output: 24V, 1000mA | ||||
| Samlex Switching Power Supply (for daisy chain application) Input: 120V 60Hz Output: 24V, 7A | |||||
Specifications are subject to change without notice. Subject to local regulations.
 |
