TR-49 Series
All-in-One Advanced
AP/PtP/CPE Model
Tranzeo is pleased to announce our all new TR-49 Series
4.9 GHz products. These are integrated fully functioning radios. That means these units can be configured as an Access Point, a Point to Point bridge, or a Client Adapter (CPE). All New Overall Features: Dual Ethernet Ports This allows you to daisy-chain radios at your installation sites (depending on power requirements). Perfect for back to back point to point scenarios. Also great for installing peripheral Power over Ethernet devices like weather monitoring or security cameras. More Robust Routing Features Tunneling Protocol Support Includes support for tunneling protocols such as VPN, PPTP, RSA, etc. All New Access Point Features: Wireless Distribution System (WDS)
WDS allows Access Points to be wirelessly connected to each other while also servicing clients.
Wi-Fi Protected Access (WPA)
WPA improves on the security features of WEP. It includes improved data encryption (AES) and user authentication.
WPA and WEP LEDs
Outside LEDs allow you to easily see if WEP or WPA is activated on your Access Point.
All New Client Adapter (CPE) Features: Alignment LEDs
Now you can align your client and point to point installations without having to log into the radio. Get visual signal strength at a glance by using this great new feature.
Controllable High Gain Output
All radios have 13dBm of output. Power can be scaled back for closer installations to avoid noise issues and to meet local regulatory requirements.
Not all channels approved for use in all areas.
Specifications TR-49-Nf / TR-49-20f / TR-49-VSEC-90-16f / TR-49-HSEC-90-16f
Features | ||||||
|---|---|---|---|---|---|---|
| Standard | OFDM (BPSK, QPSK, 16-QAM, 64-QAM) | |||||
| Frequency Range | 4940 MHz to 4990 MHz | |||||
| Radio Mode | Access Point / Point to Point / Customer Premise Equipment | |||||
| Communication Method | Half-Duplex | |||||
| Transmit Power | +13dBm | |||||
| Receiver Sensitivity | -65dBm @ 54Mbps | |||||
| Polarization | Horizontal or Vertical | |||||
Antennas | ||||||
| Model | Type | Wind Load (N) | Beamwidth | |||
100 mph | 125 mph | Horizontal | Vertical | |||
| TR-49-Nf | N-Connector | 100 | 160 | N/A | N/A | |
| TR-49-20f | 20 dBi Panel (internal) | 100 | 160 | 8.7° | 7.7° | |
| TR-49-VSEC-90-16f | 16 dBi Vertical Sector (external) | 52 | 82 | 5° | 90° | |
| TR-49-HSEC-90-16f | 16 dBi Horizontal Sector (external) | 105 | 164 | 90° | 6° | |
Management | ||||||
| Remote Configuration | Based on IP Address | |||||
| Device Management | Windows Utility, Web-Based Management | |||||
| Protocol Supported | TCP/IP | |||||
| Security | 40 bits and 128 bits WEP encryption, Media Access Control address filter (MAC), WPA | |||||
| Ethernet Connector | 10/100 base T (Water Tight RJ-45) | |||||
| Operating Temperature | -65°C to +60°C | |||||
| Warranty | 1 Year Depot | |||||
Dimensions | ||||||
| TR-49-Nf / TR-49-20f | 13″ X 10″ (radio only) | |||||
| TR-49-VSEC-90-16f / TR-49-HSEC-90-16f | ||||||
Power Supply | ||||||
| Standard | AC Wall Plug Input: 120V 60Hz Output: 18V, 1000mA | |||||
| Optional | AC Wall Plug Input: 120V 60Hz Output: 24V, 1000mA | |||||
Operation in the 4940-4990 MHz band is restricted to U.S. Operation in this range only and is restricted to the Public Safety bands. Use of these bands is restricted to entities that meet the requirements listed the FCC Part 90.20 Public Safety Pool and are properly licensed to operate a transmitter in the Public Safety band in accordance with Part 90Y of the technical rules can operate in the 4940-4990 MHz band. FCC regulations state in Part 90, operation in the 4.9-GHz band requires frequency coordination before the system can be operated.
Specifications are subject to change without notice.
 |
