| |
S404 S400 |
 
|
Product Overview |
The S400 Series VoIP Gateway is fully both SIP and H.323 standard compliant residential gateway that provides a total solution for integrating voice-data network and PSTN. By simple installation, this revolutionary compact voice over IP (VoIP) gateway could be configured as a 2/4 port FXS/FXO VoIP Gateway which provides voice connectivity over the IP network and to the Public Switched Telephone Network (PSTN).The Soundwin Gateway is equipped with a four port Ethernet switch and built-in NAT router function that provides Internet access using only one IP address.
Besides, it provides high voice quality and optimized packet voice streaming over managed and public (Internet) IP networks. |
|
VoIP Key Features |
|
1. Both support SIP and H.323 protocols: SIP Registration and Digest Authentication; H.323
Gatekeeper Registration.
2. Single Number / Account for multiple ports.
3. Caller ID Delivery and Detection: FXS support DTMF&FSK Caller ID generation; FXO supports
DTMF&FSK Caller ID detection. (Optional)
4. Flexible and Smart VoIP call Dialing Book: VoIP call Book could provide any application VoIP
call to any type destination (Domain name / IP address, PSTN or PBX) or hunting number setting.
5. AC termination Impedance : 600/900 OHM and complex impedance.
6. Answer Supervision for Polarity Reversal Detection and Voice detection.
7. NAT traversal: This feature allow gateway to operate behind any NAT/Firewall device. Need not to
change any configuration of NAT/Firewall like setting virtual server.
8. Smart-QoS: This feature provides good voice quality when user place a VoIP call and also access
internet at the same time. The gateway will automatically start to reserve bandwidth for voice
traffic when VoIP call proceeds.
9. Call Hunting Facility: This function helps gateway to use the lines effectively. This facility
automatically transfers your incoming call to a free line. Subscribers need not indicate numerous
numbers of each port of gateway.
10. Voice channels status display: This function display each port status like as on-hook, off-hook,
calling number called number, talk duration, codec.
11. Pulse Dial support: Support pulse dialing generation and detection. (Optional)
12. Flash Detection and Generation Program: FXO support Flash Generation and FXS support Flash
Detection.
¡@ |
Application Scenario |
|
The following application was use in Multi-Office as an example:
 |
Telephony Specification |
|
1. Voice Codec: G.711(A-law / £g - law), G.729 AB, G.723 (6.3 Kbps / 5.3Kbps)
2. FAX support : T.30 / T.38
3. Echo Cancellation: G.165/G168
4. FXO Caller ID detection : DTMF and FSK (Optional)
5. FXO hang up detection / anti-seized : Tone Learning Automatically / Manual Tone Learning
(Optional)
6. Answer supervision: Support Battery Reverse Detection and Voice Detection.
7. FXO answer delay time: Support delay 0 ¡V 8000 ms to answer.
8. Adjustable AC Termination Impedance : 600 / 900 OHM and complex Impedance
9. Failsafe Mechanism (FXS relay to FXO) : Power failed by pass support / Internet Failed by pass
(Optional)
10. 12K Hz and 16K Hz Metering (Customized) |
IP Specifications |
|
1. H.323 v2/v3/v4 and SIP (RFC 3261) , SDP (RFC 2327), Symmetric RTP, STUN (RFC3489), ENUM
(RFC 2916), RTP Payload for DTMF Digits (RFC2833), Outbound Proxy Support.
2. LAN :Support Virtual Server, DHCP Server
3. WAN: Support PPPoE client, DHCP client, Fix IP Address, DDNS client
4. Network Address Translation: Providing build-in NAT router function.
5. Smart QoS: Guarantee the voice bandwidth
6. IP TOS (IP Precedence) / DiffServ |
Call Features |
|
1. Voice channels status display
2. Direct Dialing Mode : peer to peer call (support IP Address Call or Domain Name Call)
3. Register Call Mode : register to SIP Proxy Server or H.323 Gatekeeper
4. Adjustable volume : - 9 db ~ 9 db
5. Silence Compression / VAD
6. Auto Dial for speed
7. Dynamic Jitter Buffer
8. Hot-Line Support |
Configuration & Management |
|
1. Web-based graphical user interface
2. Remote management over the IP network
3. FTP firmware upgrade
4. Backup and Restore Configuration file
5. Syslog client support |
General Specification |
|
1. AC power : AC100V-240V, DC12V/1.5A,50/60 Hz
2. Temperature: 0¢XC ~ 40¢XC (Operation)
3. Humidity: up to 90% non-condensing
4. Emission: FCC Part 15 Class B, CE Mark
5. Dimension : 260*130*40 mm
6. Weight: 900g ( Aluminum ) |
|
regresar a productos |
|
|
|
|